• 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
  • 12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

US$35.79
US$42.42 -16%
(0 Reviews) Sold: 8

Shipping Method

Product Details

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

Description:
1. models automatically adapt to meet OBD II or EUOBD (automatic vehicle diagnostic system) models and Play;
2.3 inches screen high-definition display;
3. The use of nano technology to eliminate unwanted reflections sharper pictures;
4. The display rich content: speed, engine speed, water temperature voltage instantaneous fuel consumption, average fuel consumption, low voltage alarm high water temperature alarm, speed alarm, engine fault alarm, fault codes kilometers miles eliminate free switching;
5. Automatic Switcher, vehicle start, lorry shutdown, effectively protect the car battery; while retaining the manual switch mode, more conducive to control HUD;
6. Automatic and manual brightness adjustment mode, the traffic is not dazzling.

Specification:
Ambient temperature: -40c- + 80c atmospheric 86-106KPa
Relative Humidity: 10% -95% Environmental Noise <= 60dB (A)
Alarm sound level: "= 30dB (A)
Operating voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product Dimensions: 9 * 5.4 * 1.2 (cm)
Product Weight: 40 grams

HUD preparation before installation and use:
1. Know your car brand, at the time of purchase HUD to choose line with OBD II (or EU OBD) standard models for proper use, open the hood and look for the sticker below, if you have the words of OBDII CERTIFIED can be installed (Figure 1) check the bottom of the steering wheel have no car diagnostic socket (domestic car in 2007 after most of the car assembly).
2. find the vehicle 16-pin diagnostic socket , and then connect it with the OBDII cable

HUD initial use:
Car name engine. HUD switch opens, showing the current vehicle voltage then enter the search car computer version of the state, if the HUD showing fuel consumption, speed, speed, indicates that the product has been installed successfully. (After 1 minute, or if the display voltage only then, check HUD hosts, OBD Interface OBD data line, the vehicle is properly connected, and make sure the connection is stable and reliable. Open HUD host power switch, start scanning again).

Package Included:
1 X Displayer 1 X OBD Cable 1 X Mat
1 X Protect Film 1 X Manual

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector
12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector

12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector


12V 3 Inch X6 Car OBD HUD Projector Head Up Display Car Alarm System Detector


You Might Also Like

      • Language

        English (EN)

      • Currency

        USD  US$

      Move to