12V/220V 10A Digital LED Temperature Controller Thermostat Control Switch Sensor + Probe
Product name: Highly accurate digital temperature controller
Specification and model: XH-1411
Temperature measurement range: -55 - +120℃
Temperature measurement accuracy: ±0.3℃
Temperature control range: -19~99℃
Control accuracy: 1℃
Temperature measurement probe: NTC10K/B3950 (with 1m standard water-proof probe)
Power supply voltage: DC12V/ 100-240V
Display color: red+green, blue+yellow (alternative)
Applicable environment: -25~55℃, humidity 20%~85% (no condensation)
Output type:10A relay output
Appearance size: Approx. 90x60mm/ 3.54X2.36"
Open hole size: Approx. 70x50mm/ 2.76x1.97"
Probe length: Approx. 1m/ 39.37"
1. Plug the plug of this product to a household socket. If the screen displays temperature, it means the power supply has been correctly connected
2. Put the temperature control probe into the places that need temperature control, and set the start and stop temperature according to your needs
3. Plug the plugs of heating and refrigeration devices to the socket of temperature controller, and then you can achieve temperature control
Restore factory settings:
If there is some setting mistake or setting disorder, you can press the two stop buttons to restore factory settings.
When the screen displays 88-888-88, and the buzz gives out a long sound, it means the restoration has finished.
Default start value is 25, stop 40, F-1 01-10, F2 00-30, F-3 00-30, correction=000
1 x 1M Probe