[Qualcomm Certified] BlitzWolf® BW-S6 Quick Charge 3.0+2.4A 30W Charger AU Adapter With Power3S Tech
Qualcomm Quick Charge 3.0 Tech :
as Quick Charge 1.0 and to be 38% more efficient than Quick Charge 2.0. With Quick Charge 3.0 you can charge a typical phone from
0 to 80% in about 35 minutes compared to conventional mobile devices.
Qualcomm Certified (Quick Charge 3.0): NT6008 Fast Charge Chip:
for non-Quick Charge devices.
QC 3.0 Charger's Voltage Output will run at 3.6V-12V. Automatic voltage adjustment, provide better control of power consumption and heat.
BC1.2 & Apple Fast Charge Protocol
It means your Apple devices can be fast charging just like using the original Apple iPad charger (up to 5V/2.4A Max). It is also compatible with
all non-QC devices and will charge at their normal charging speed (up to 5V/2A Max).
Intelligently identifies the electronic device and speaks the language it needs for full speed charging. This item will not limit the charging speed for
plugging any suitable into devices to charge,two times faster than the traditional charger and save time.
QC3.0+2.4A 30W Powerful Output:
QC3.0 mode: Variable 3.6V-12V with 200mV incremental dynamic regulation
QC2.0 mode: Stepped 5v/2.4A ,9V/2A and 12V/1.5A . Rated at 18W but can peak at up to 12V/2A~24W.
Standard Fast 2.4A Mode: 5V/2.4A. Rated at 12W.
Safe and Sturdy Design:
Lightweight, compact and easily portable.Contains internal protection mechanisms.Its protection function for over-current, overheat, short circuit
and over-voltage,ensures the safety of charging.
An 18-Month Warranty:
We believe in our products, join BlitzWolf to get what you want. We back them all with an 18 months warranty and provide friendly and convenient
|USB Port||18W(Max) QC3.0 Port + 12W(Max) 2.4A Port|
|Total Power||30W (Max)|
|Input||AC 100-240V~50/60Hz 1A|
|Output||2.4A Port: 5V/2.4A (Max)|
|QC3.0 Port: 3.6-6.5V/2.4A 6.5-9V/2A 9-12V/1.5A (Max)|
|Size||53 X 53X 25mm / 2.09X 2.09 X0.98inch|
1 * BlitzWolf® Quick Charge 3.0 +2.4A 30W Dual USB AU Charger
1 * BlitzWolf® 70cm 2.4A Micro USB Cable
FAQ & Solutions
1. What is the difference between the Power3S charging ports & Standard charging ports?
The Power3S charging ports are Capable of charging any kinds of device at full speed while the Standard charging ports can only charging the device that fit for
the system of ports at full speed,such as iOS & Android devices
2. What if the dual-port Desktop Charger is not charging my device(s)?
A. Check to ensure that your device is USB-powered with an input current between 0 and 2.4A and a voltage input of 5V.
B. Check to ensure that the power cord is connected to an active wall outlet and also firmly connected to the dual-port Desktop Charger.
3. How do I check my device's Input current and voltage?
Please refer to your device’s user manual, original OEM charging adapter, or contact the manufacturer to determine this information.
4. My device charges at 1Amp,will this charger's 2.4Amp output harm it?
No. The charger will only supply the maximum charge current allowed by your device up to 2.4Amps.
5. Will my device charge at full speed 2.4A?
6.What should I do if one port isn't working properly?
If a port is not working properly ,it may be because your device has triggered the protective internal safety switch.In order to reset the switch , unplug all
the cables ( including the power cable ) for five seconds and try again . The charger can work perfectly again.
devices compatible with QC3.0 fast charge tech, please plug in QC3.0 port and your devices charging speeds will of up to 80% faster than 2.4A
port or another normal chargers.
8.If my devices is not compatible with QC3.0, can I use the QC3.0 port to charge?
Thanks for Power3S identify tech that you can use QC3.0 port to charge your un-QC3.0 devices as same as 2.4A port which maximum support 5V/2.4A